2.85 with blower spacers?

[Hemiride]

I'm going to install my listens 2.85 upper pulley and blower spacers this spring.

Will the stock belt work? If not what size will I require?

 

[hellno]

I'm going to install my listens 2.85 upper pulley and blower spacers this spring.

Will the stock belt work? If not what size will I require?

dudnt I send you a belt with that ? If so it will still work

 

[Hemiride]

My son asked me and I thought I read that with blower spacers it allowed you to use the stock size belt with a 2.85
But I wasn't positive lol

 

[Hemiride]

And yes u sent me the belt

 

[hellman]

Hey Hemiride, Mean Cat runs the TBA Machine 2.85 pulley with the blower spacers and he uses the stock belt. No problem.

 

[Hickster]

I found a whole roll of blanket in the garage today. Guess the ex was going to use them as fairy blankets for neaster egg hunster… Guess what,, Sunday gone. Gots to be lurking around my ger age today and found all sorts of stuff. Like bimbo posters, 442 cleavage swim suits, bottle of vicadens. Great fer the Hemi. Long hedged bolts off set, 4 craftsman's tool boxes, a new car, want say, case of beer. AND most important, about 4,500 rounds of full metal jacket humidity controlled amino. Of all flavors. Looks to be project at 10 am while can't watch the St Peter's burger Grand Prick. Bust another ver ter bra. Got to make my gun shop into a bed room for the big wedding I am not invited to. Rater have back surgery on the 6th. Oh well,, hell, collect all my shit in 1 place after 14 years and have a shine and fer get ster. Car painted Monday, town home finished 2nd week of April, all guns and wine and knives collected and ready fer war. Car back into a 2.5 car garage,,, new door. Off to vicaden land.

 

[Hemiride]

Hey Hemiride, Mean Cat runs the TBA Machine 2.85 pulley with the blower spacers and he uses the stock belt. No problem.

Thanks for the reply

Since this thread has been brought back to life, I wonder if anyone knows what the pulley is supposed to be torqued to?

 

[Linda's Hell Cat]

@TeamDemon could answer your questions.

Linda

 

[Mean Cat]

Thanks for the reply

Since this thread has been brought back to life, I wonder if anyone knows what the pulley is supposed to be torqued to?

I did 65 ft. lbs. , Speedy's video said 59 + / - 7

 

[Hemiride]

Thank you

 

[Mean Cat]

Thank you

Your welcome , & some blue Loctite.

 

[Hemiride]

I have another question which is unrelated

I have the blower spacer and thermo blanket kit

Question is. When applying the blanket do you clean the bottom of the blower before putting the blanket on? If so what is used to clean the surface?

 

[Mean Cat]

I have another question which is unrelated

I have the blower spacer and thermo blanket kit

Question is. When applying the blanket do you clean the bottom of the blower before putting the blanket on? If so what is used to clean the surface?

Just use a wet towel to get dirt / dust off & dry it off & the blanket will stick fine.

 

[Hemiride]

Just use a wet towel to get dirt / dust off & dry it off & the blanket will stick fine.

I bought my kit a year ago Feb.

Now I just read that there's an issue with the bolts being 5mm too short. So far no one has an answer for that. What's your take on that?

 

[Mean Cat]

I bought my kit a year ago Feb.

Now I just read that there's an issue with the bolts being 5mm too short. So far no one has an answer for that. What's your take on that?

I didn't hear that , if your talking about the bolts that come in the kit ?.... they were fine for me & I added a small washer under the bolt head so it doesn't dig into the s/c lid.

 

[Hemiride]

Go to build projects
It's like 12 threads down to read what I did

 

[Mean Cat]

Go to build projects
It's like 12 threads down to read what I did

OK, if you are worried about that you can do the threaded rod & nut. I haven't heard of any issues with it as is, yet ?

 

[Hemiride]

Thought about it

 

[Mean Cat]

Thought about it

Well you've had over a year now so get to it , LOL.

 

[Alain]

I didn't hear that , if your talking about the bolts that come in the kit ?.... they were fine for me & I added a small washer under the bolt head so it doesn't dig into the s/c lid.

Any M8 size washer will work correct ?