Run anyone a 2.50" or 2.40" Pulley from metco???

[Kittycat]

thanks for all the reactions, I decided on the matco 2.65 "and will try to run the original injectors with a pcm tune first. if they are not enough, I would rather use 1050x nozzles?
so we have 102 Gas for street use

 

[oilburner]

thanks for all the reactions, I decided on the matco 2.65 "and will try to run the original injectors with a pcm tune first. if they are not enough, I would rather use 1050x nozzles?
so we have 102 Gas for street use

don`t think oem injs. are going to do it with that upper, good luck.

 

[Bboyd]

Think u will need injectors!

 

[FFBOS]

thanks for all the reactions, I decided on the matco 2.65 "and will try to run the original injectors with a pcm tune first. if they are not enough, I would rather use 1050x nozzles?
so we have 102 Gas for street use

you will absolutely need injectors

 

[Speedy!]

Right on injectors. Mine were maxed on a 2.72. Video of it on my YT channel.